CUSTOM LEISURESCAPES · LONDON & STRATFORD
Answer a few questions to create a practical daily, weekly and monthly plan. Get a daily, weekly and monthly water-care schedule with matching Custom LeisureScapes products, researched treatment references and a plan you can send to our team.
Practical hot tub maintenance for London, Stratford and Southwestern Ontario: test daily, review water balance weekly and check filters, covers and water condition monthly.
YOUR ROUTINE STARTS HERE
Use your latest water test if you have one. If you don’t know a result, choose “Not sure.”
YOUR PERSONAL ROUTINE
OPTIONAL EXTRAS
These add-ons are optional—not required for a basic routine. They do not replace sanitizer, testing or filter care.
READY WHEN YOU ARE
Use the buttons beside routine steps or optional extras to add products here.
Review your cart after adding products. Product prices, availability and purchase options are shown in the shop.
Published treatment references apply to the named IPG products, not interchangeable brands. Your current container directions take precedence if the formulation differs. This routine is general educational guidance, not a diagnosis of your water or a replacement for product labels, test-kit directions or your spa manufacturer’s instructions. If readings are unknown, water remains cloudy, or you are unsure which products are compatible, pause treatment and ask a pool-and-spa professional.
Copy your plan and selected products into the contact form, add your details, then submit your request to the team.
YOUR HOT TUB MAINTENANCE SCHEDULE
A useful routine combines daily sanitizer testing, regular water-balance checks, filter care and a monthly review. Buy the products your test results call for; adding every available treatment can make troubleshooting harder.
Test free chlorine or bromine, check pH, look at the water level and confirm circulation. Test before a soak and pay extra attention after guests or heavy use. Keep a dated record. Health Canada recommends 3–5 ppm sanitizer for residential hot tubs.
Run a complete water test, including alkalinity and calcium hardness as your spa requires. Resolve alkalinity before fine-tuning pH, allowing circulation and retesting between treatments. Inspect the filter and rinse trapped debris. Review oxidation needs for your existing sanitizer program.
Check the cover, filter condition and recurring changes in your test log. Deep-clean reusable cartridges when their condition and the spa instructions call for it. Review water age and bather load; monthly maintenance does not automatically mean a monthly drain.
The essentials are a sanitizer suited to your existing system, compatible test supplies and any balancer your readings require. Spa Quick 100 serves chlorine routines; Spa Bromine belongs to an established bromine routine. Alkalinity Plus raises low alkalinity, pH Plus raises low pH and pH Minus reduces high pH. Clarifier, foam control, enzymes and conditioners serve specific optional needs.
Explore Custom LeisureScapes spa chemicals or ask about hot tub service in London and Stratford when the same water problem keeps returning.
Choose the sanitizer for your existing system, then add balancers only when a test calls for them.
Test daily and before bathing. Extra use can change sanitizer demand, so retest after busy periods and after a chemical adjustment has circulated.
Test daily; decide on treatment from the result. The Quick 100 maintenance reference is 10 g per 1,000 L daily or as needed, but it is not an instruction to add chlorine when the residual is already sufficient. Retest before bathing.
Sanitizer is only one part of the picture. Check pH, alkalinity, filter condition and circulation. Do not use a clarifier to cover up an unresolved low sanitizer reading, and keep bathers out until the water is clear and readings are suitable.
Keep the two systems separate. Never mix concentrated chemicals or put different products into the same feeder. Changing sanitizer systems needs a deliberate plan with Custom, rather than adding the other product to the existing water.
No. These are optional additions to an established routine. Maintain the required sanitizer residual and continue testing and filter care.
Contact Custom’s London showroom or Stratford showroom. Send your plan with a recent test, spa capacity and the names of your current products.
Water-care reference: Health Canada’s swimming pool and spa chemical guidance. Product references were checked on October 19, 2026.
LOCAL HELP WITH YOUR ROUTINE
Build your routine above, select any products you want to discuss, then choose “Send my routine to Custom”. Review the copied plan in the form below, enter your contact details and submit.