...
FREE local delivery!
Call Now Custom LeisureScapes: London & Stratford Ontario’s pool, hot tub, and swim spa experts.
FREE local delivery!
Call Now Custom LeisureScapes: London & Stratford Ontario’s pool, hot tub, and swim spa experts.

CUSTOM LEISURESCAPES · SPA WATER, EXPLAINED

How to use AquaChek Spa 6-in-1 test strips

Dip correctly. Match the right pad. Understand what your water is telling you—and choose a useful next step.

For AquaChek Spa 6-in-1 · model 552244 · chlorine and bromine spa owners

AquaChek Spa 6-in-1 test strip bottle sold by Custom LeisureScapes
Five test pads. Six measurements.
One shared chlorine/bromine scale.

To use AquaChek Spa 6-in-1 strips, dip a fresh strip into the water and remove it immediately. Hold it level for 15 seconds without shaking off the excess water, then compare the pads with their numbered colour scales. The 15 seconds is the development time after removal, not a 15-second soak.

The strip measures total chlorine, total bromine, free chlorine, total alkalinity, pH and total hardness. These readings answer different questions. Sanitizer tells you about disinfectant residual; pH and alkalinity describe different parts of water balance; hardness measures dissolved calcium and magnesium together. A result becomes useful when you understand those differences.

This guide brings the procedure, numbered scales and explanations together. Use the timer while testing, explore the pad layout, then select your readings to create a plan. When a result needs attention, Request a solution opens relevant Custom products with photographs and a reason for each suggestion.

01 / START WITH A RELIABLE TEST

A quick dip. A level strip. A proper reading.

Begin with dry hands and a fresh, in-date strip. Take out only the strip you need, avoid touching its pads and close the container promptly. Water or steam in the bottle can affect unused strips before they reach your spa.

1

Dip and remove

Wet the test pads, then remove the strip immediately. Do not leave it soaking while the timer runs.

2

Hold level for 15 seconds

Keep the strip horizontal and do not shake the water off. Start the timer as soon as the strip comes out.

3

Compare the right rows

Read the developed colours at the stated time, in good light. Keep the handle and tip orientation clear.

YOUR 15-SECOND TESTING COMPANION

15seconds

Have a strip ready. Start when you remove it from the water.

The demonstration is an animation. The timer starts only when you press the start button.

Use a separate timer: hold the strip level for 15 seconds after removal, then compare its pads.

Small testing mistakes can change the answer

Touching the pads can contaminate them. Leaving the bottle open beside a steaming spa can expose the remaining strips to moisture. Reading a strip after it has sat around is a different procedure from reading at 15 seconds: colours may continue changing, and an old strip is not a fresh test.

Use even, neutral light so glare and strong coloured lighting do not dominate the comparison. If a pad is streaked, unfamiliar or between colours, record that uncertainty. A confident-looking number chosen from a poor match is less useful than saying which result needs a repeat test.

Keep the container closed between uses, store at room temperature and check the expiry date on the cap. Do not move loose strips into a damp cup or an unmarked bottle.

02 / KNOW WHICH PAD YOU ARE READING

Six tests do not mean six separate pads

The pad at the tip has two numbered interpretations: total chlorine and total bromine. They are alternative scales for that same pad, not two independent measurements of the water. The free-chlorine pad is separate.

TIPHANDLE

Total chlorine / total bromine

Read the end pad using the scale for the sanitizer system already in your spa. Selecting chlorine does not convert a bromine spa into a chlorine system.

Choose the sanitizer pathway before judging the result

For a conventional chlorine routine, free chlorine is the residual used to check available chlorine. Total chlorine adds the free and combined forms together. In an established bromine routine, use the total-bromine scale on the shared end pad. A low reading is not an instruction to switch to the other sanitizer.

Specialty programs can use different targets or testing methods. If you use a SmartChlor cartridge system, biguanide or another program you cannot identify, select that option below. The guide will still explain your balance readings but will not prescribe conventional chlorine or bromine products for an unidentified program.

03 / MATCH YOUR READINGS

Build a picture of your spa water

Select the closest numbered block for each pad. The on-screen strip updates as you go. If the match is uncertain, choose Between colours / not sure; the guide will explain what needs confirmation.

Choose the program you already use. Product suggestions depend on this choice.

Screen colours are illustrative comparison aids, not calibrated measurements. Lighting, displays and label revisions can change the appearance. The numbered steps shown are for Spa 6-in-1; use the scale supplied with your current strips if it differs. Select “not sure” when colour matching is uncertain.

1 Total chlorine / total bromine

One pad, two scales. Choose the chlorine or bromine scale for your current sanitizer system.

End pad · farthest from the handle

ppmNo reading selected
2 Free chlorine

The chlorine reading used to check the available chlorine residual in a conventional chlorine spa.

Second pad from the tip

ppmNo reading selected
3 Total alkalinity

The water’s buffering capacity: how strongly it resists changes in pH.

Middle pad

ppmNo reading selected
4 pH

How acidic or basic the water is at the time of testing. It is not the same measurement as alkalinity.

Fourth pad from the tip

pH scale · no ppm unitNo reading selected
5 Total hardness

Combined calcium and magnesium hardness. It does not separately measure calcium hardness.

Pad nearest the handle

ppmNo reading selected
Choose a value or “not sure” for each of the five pads.

The numbered scales remain visible above. Enable JavaScript to select readings, generate explanations and open product solutions.

04 / UNDERSTAND THE CHEMISTRY

What each test actually means

Free chlorine: what remains available in a chlorine spa

Free chlorine is the chlorine residual available to act as a disinfectant. It is not a count of how much product you added earlier. Bathers, contamination and the treatment program can change how much remains, which is why a current test is more useful than a remembered dose.

This guide uses Health Canada’s 3–5 ppm reference for residential hot tubs using conventional chlorine or bromine. A strip reports broad colour steps, so “3 ppm” represents a matched block, not a laboratory measurement to several decimal places. A low result needs attention before bathing; a high result does not call for more sanitizer.

Total chlorine: free chlorine plus combined forms

Some chlorine can react with contamination and form combined chlorine. Total chlorine includes both free and combined forms. That is why a total-chlorine result should not be treated as the amount of free sanitizer available.

A higher total than free result can be a reason to investigate combined chlorine, but subtracting coarse strip blocks does not produce a precise measurement. If total appears lower than free, repeat the test rather than accepting a negative result. Recent non-chlorine shock can also affect interpretation of some chlorine tests; record the product and timing before choosing further oxidation treatment.

Total bromine: the shared pad’s other scale

The end pad has a chlorine scale and a bromine scale because its colour can be interpreted for either system. For example, the same block can be labelled 3 ppm total chlorine and 5 ppm total bromine. Those two printed values are not two separate findings from one dip.

If your spa already uses bromine, use the bromine value when reviewing its sanitizer residual. A free-chlorine reading is not a separate instruction to add chlorine to that system. A low bromine result can involve feed, demand or the established program; tablets in a feeder do not necessarily restore a residual instantly.

Total alkalinity: resistance to pH movement

Alkalinity describes buffering capacity: the water’s ability to resist a change in pH when acids or bases are introduced. It is measured in ppm. Low alkalinity can make pH easier to move; high alkalinity can make an adjustment harder and contribute to pH rising again with aeration.

That does not mean alkalinity and pH rise and fall in perfect agreement. You can have high alkalinity with a pH that is in range, or low alkalinity with high pH. A reducer affects both, while an alkalinity increaser can also affect pH. Read the pair together before deciding on the correction. The 80–120 ppm band used here is a working reference; an identified spa program can specify its own target.

pH: the water’s acidity or basicity right now

pH describes acidity/basicity on a numerical scale, not in ppm. This guide uses a 7.2–7.8 working band. A below-target result can contribute to discomfort and corrosive conditions; a high result can increase deposit risk and change chlorine effectiveness. Water temperature, hardness and other chemistry also affect what happens.

A pH of 7.2 is within this working band even though it sits below 7.8; it does not automatically call for pH Plus. Likewise, an in-range result is not an instruction to force the water toward the midpoint. Check trends and the target for your spa instead of repeatedly adding products to chase one shade.

Total hardness: calcium and magnesium together

This strip measures total hardness, not calcium hardness alone. Total hardness combines calcium and magnesium. If the spa instructions specify a calcium-hardness target, the strip’s total-hardness number is not an identical substitute.

AquaChek’s current water-testing guidance gives a 250–500 ppm total-hardness reference band. A high block can support an investigation into mineral deposits, particularly with high pH, but it cannot tell you which mineral is responsible. A low block is a reason to confirm calcium hardness before adding a calcium increaser. A conditioner does not remove dissolved calcium simply because the water feels softer.

05 / TRY IT BEFORE YOUR NEXT TEST

See how a combination changes the explanation

Load a clearly labelled practice example into the chart. Compare the explanations and solution panels, then clear it before entering real readings.

Low buffering + low pH

Why adding two increasers immediately can miss the right sequence.

High sanitizer

Why the useful next step may be to stop adding treatment, not buy another bottle.

A bromine routine

See the end pad use the bromine scale while the chlorine comparison steps aside.

What should you correct first?

First identify any reason to keep people out: an unsuitable or unknown sanitizer residual, out-of-range pH, cloudy water or a circulation/equipment concern. A “within range” badge on one result does not cancel a problem elsewhere.

For water-balance work, total alkalinity is commonly considered before fine-tuning pH. That is why the solution panel can hold back a pH increaser when alkalinity is also low. When readings point in different directions—such as high pH with low alkalinity—the right outcome may be a staged plan from Custom instead of an automatic product suggestion.

After an adjustment, allow the product’s specified circulation and take a new test. Do not stack corrections using the original strip as if its colour updates when you add something. Keep the time, readings and products used together in a short record so the next decision is based on what changed.

What this strip cannot diagnose

Six measurements are useful, but they do not identify every cause of cloudy water, test for all contaminants, measure bacteria, confirm equipment operation or directly measure calcium hardness. There is no cyanuric-acid pad on this Spa 6-in-1 product. Do not add a stabilizer reading from another AquaChek chart.

If a result is at the highest colour block, the concentration may be at or beyond the strip’s scale; a colour match cannot resolve the amount beyond that limit. Use a suitable confirmation method rather than inventing an exact number.

QUESTIONS WHILE YOU TEST

AquaChek Spa 6-in-1 FAQs

Do I leave the strip in the water for 15 seconds?

No. Dip and remove immediately, then hold it level for 15 seconds without shaking off the excess water. Read the developed colours at that point.

Why are there five pads if it is a six-in-one test?

The end pad is read using either the total-chlorine or total-bromine scale. The other four pads measure free chlorine, total alkalinity, pH and total hardness.

What if my strip is between two colours?

Choose the uncertainty option rather than forcing a precise value. Repeat a properly timed test in even light. When the difference would change a treatment decision, confirm it with another appropriate test.

Can I use the free-chlorine number to judge my bromine spa?

Use the total-bromine scale on the shared end pad for the bromine pathway. The tool does not use chlorine-style total-minus-free interpretation to recommend treatment for a bromine spa.

Does low total hardness mean I should add calcium immediately?

No. The strip measures calcium and magnesium together. Confirm calcium hardness and the range required by the spa before adding a calcium increaser.

Why did the guide show no product for a high reading?

Some results call for stopping an addition, repeating the test or reviewing the water source and equipment. A high sanitizer result does not need more sanitizer, and a high hardness result is not corrected with Calcium Plus.

Can this chart read a photograph of my strip?

No. You select the closest numbered block or mark the result uncertain. The guide does not claim to perform calibrated colour measurement from a phone photograph.

Does an in-range result mean the spa is safe to use?

The badges describe the readings you entered against the stated reference bands. They do not test for bacteria, inspect the spa or override cloudy water, equipment faults, an unsuitable sanitizer program or product-specific re-entry conditions.

CUSTOM LEISURESCAPES · LONDON & STRATFORD

Turn an unclear test into a useful conversation

Bring your readings, spa water volume, sanitizer program and the names and timing of recent treatments. Explain any cloudiness, odour, persistent pH movement or circulation concern. That gives Custom more to work with than a colour description alone.

Test guidance and product associations reviewed 9 November 2026. This educational guide uses entered strip readings; it does not provide a laboratory diagnosis or a chemical dose.

Related Posts

Leave a Reply

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.